SECTIONAL ALUMINIUM OVERHEAD DOORS
Built to withstand heavy use and high traffic. Features extruded aluminum alloy rails and stiles with a full width integral horizontal reinforcing truss at each pair of meeting rails.
A175: 1 3/4" A200: 2" A300: 3"
Options
Thermatite Bottom Section: Insulated section with a Neufoam™ polyurethane core. Fabricated from pre-painted, hot dipped galvanized, steel sheet. CFC and HCFC free. Face sheet comes stucco embossed and rib reinforced.
Plywood Kick Panel: 3/8" (9.5 mm) thick plywood covered on both sides with 0.032" (0.8 mm) aluminum or 0.037" (0.94 mm) embossed steel sheets.
Exhaust Port on Kick Panel: 3", 4", or 5" (76, 102, or 127 mm) diameter. Not available for thermatite section.
Available in acrylic or a variety of glass options:
Thickness options:
Options vary by glass type. Contact your local dealer for the full range of glazing options.
*Alumatite door rails and stiles can be powder coated in a variety of 188 custom colours.
| A175 | A200 | A300 | |
|---|---|---|---|
|
End Stile Width |
3 3/8" or 6 1/2" |
||
|
Centre Stile Width |
1 7/16" |
3 5/8" |
3 5/8" |
|
Maximum Opening Width |
16' |
15'-1" |
24' |
|
Maximum Opening Height |
16' |
18' |
20' |
At Richards-Wilcox, our exclusive linear hardware system has been optimized to work with today’s newest technology and panel construction. Our hardware features one of the greatest strength-to-weight ratio’s in the industry along with faster installation.
Commercial
View the latest projects
Get inspired! Take a look our commercial gallery to browse a variety of installs.
What's next?
Insulated garage doors
Polycarbonate garage doors
Commercial overhead doors
