Sectional insulated steel doors.
Thermatite Door Systems are built stronger with Neufoam™ technology – a continuous foaming process that renders cavity-free sections. No air pockets inside the panel ensures superior adhesion of our CFC/HCFC-free polyurethane insulation to the steel skin, preventing delamination and providing exceptional structural integrity. The door has a higher strength-to-weight ratio, offers a better thermal barrier (higher R-Value) and resists deflection. Sections feature thermal breaks and two continuous replaceable seals to minimize air flow. Installed with our highest quality hardware components, Thermatite Doors are engineered to provide many years of worry-free operation and are suitable for a wide range of applications.
- Charcoal Grey
- Forest Green
Two coat, baked-on paint system on exterior side, primer and polyester finish coat.
- T150-MR / T150 White / Brown / Silver / Bronze / Charcoal Grey / Forest Green / Black
- T175-MR / T175 White / Brown / Café / Silver
- ADV200-MR / ADV200 White
- T175-20 White
- T200A-MR / T200A White
- T300-MR / T300A White
Full length retainer and bulb weather strip minimize air flow and ensure weather-tightness at the base of your door.
Doors are constructed to withstand wind load specified in ANSI/DASMA 108. Linear style trusses are provided according to door size. Additional trussing can be provided for higher wind load applications.
Roll formed from commercial galvanized steel. Vertical tracks sloped to ensure weather tight seal. Horizontal track curve available in 12″ (305mm) or normally provided 16″ (406mm) radius.
Bolted type, field adjustable, rib reinforced, stamped from 0.123″ (3.1 mm) thick commercial galvanized steel.
Ten ball bearings provide years of smooth and quiet operation. 7/16″ (11mm) diameter standard stem, long stem on doors over 16’-2″ (4928mm) wide.
Helically wound torsion springs manufactured from oil tempered spring wire, stress relieved, minimum 10,000 cycles. Aluminum die-cast grooved drums. Flexible 7 x 19 construction aircraft type galvanized cables with 5:1 safety factor. Higher cycle available upon request.
72″ (1829 mm) long or 90″ (2286mm) for 3″ hardware.
Linear type, fabricated from 0.078″ or 0.106″ (2 or 2.7mm) thick zinc plated steel with embossments designed to resist higher load and provide greater stability resulting in improved performance.
Top Roller Carrier
Fabricated from zinc plated steel designed to provide greater stability, field adjustable to ensure weather tight seal.
Linear type fabricated from 0.078″ or 0.106″ (2 or 2.7mm) zinc plated steel. Graduated type design to ensure weather tight seal.
1″ (25mm) diameter 0.078″ (2mm) tube or 1/8″ (3mm) wall keyed full length or 1″ (25mm) diameter cold rolled galvanized steel keyed full length.
Full height fabricated from galvanized steel, complete with bolt-on type bearings.
Interior slide bolt type.
- Combination PVC step plate and lift handle
- Exhaust port: 3″ (76 mm) / 4″ (102mm) / 5″ (127mm) diameter
- Flexible top weather strip for full width of door
- Full height thermal break and anti-friction strip for galvanized end caps
- Aluminum end stiles with full height jamb seal
(Note: For T175-MR, T175, T175-20 only)
- Pass doors: 32″ x 80″ (813mm X 2032mm) four section pass door available in doors up to 16.2’ (4928mm)
(Note: *14.2’ (4381mm) for T150 and T200A)