The R500 fire door is manufactured to the highest standards featuring space saving designs with user-friendly operation. Ideal for warehouse, retail, industrial or security applications.
Max Door Size
U.L. Label sizes up to 120 sq. ft., oversized labels are provided for openings up to 600 sq. ft.
Gauges
Options
Fire Ratings: 45/90 minutes, 3 hours or 4 hours (18-gauge only).
Automatic Closing Devices: XP, XPBB, AFCB. Head plate fabricated from 1/4" steel.
Detection and Activation Devices: Smoke and heat detector, horn.
Optional Mounting: Between jamb under lintel (fascia required) or above lintel.
Vision Panels: 5" wide x 3/4" high available on any UL rating (not available on 18-gauge door).
Flame Baffle and Jamb Seal: Helps prevent smoke infiltration through the header and jamb. NFPA105 Smoke control upon request.
High Cycle Springs: Available in 50,000 cycles and 100,000 cycles.
Slat Profile
*Powder coat finish is available in a variety of color options. 40-year film integrity and a 35-year no-chalk/no-fade limited paint warranty.
R500
Material
Galvanized steel with baked polyester & epoxy primer.
Endlocks
Endlock or windlocks on every alternate slats.
Operation
Manual/Chain hoist or electric operator. Motor operator include time delayed automatic closing, auto reset overload protection, monitored battery back-up, low battery warning, keyed test station, detector/alarm input, 24-volt control circuit.
Guides
Structural steel with 30" service cutout and removable headstop. 3/16" minimum thickness.
Bottom Bar
Structural steel two-piece angle and bulb weatherseal.
Hood
24 ga galvanized steel with baked epoxy primer and baked polyester. Over 16' wide, steel bracket added.
Counterbalance
25,000 cycle oil-tempered helical torsion spring.
Barrel
Steel pipe drum build with maximum deflection of .03"/ foot width. Spring to be mounted on a cold rolled steel inner shaft with self-lubricating end ball bearing.
Brackets
Head plate fabricated from 1/4" steel.
What's next?
Rolltite R550
Rolltite R600
Rolling Steel Doors
